50mm Beam Aperture Comparison Chart
| Specifications |
|
|
Units & Tolerances |
| Optical Apertures Supported, two-axis |
50 |
>50 |
MM |
| Maximum Recommended Load |
1000 |
50,000 |
gm*cm2 , +/-10% |
| |
| Mechanical |
| Rotor Inertia |
70 |
1300 |
gm*cm2, +/-10% |
| Torque Constant |
1.63 |
4.5 |
x106 Dyne-cm/Amp, +/-10% |
| |
| Electrical, Drive Armature |
| Coil Resistance |
2.2 |
0.9 |
ohms, +/-10% |
| Current, RMS |
5 |
14 |
A, Maximum |
| Small Angle Step Response |
6 |
8 |
ms, with balanced inertia matched load |
| |
| Electrical, Position Detector |
| Linearity |
99.9 |
99.9 |
%, minimum, over 40 degrees |
| Repeatability |
1.5 |
2 |
Microradians, Typical |
|
Trade Shows Press Releases New Products
Choosing A Galvo 3mm 5mm 6mm 8mm 10mm 12mm 15mm 20mm
30mm 50mm 6200H Product Line Overview 6200H 6210H 6215H 6220H 6231H 6230H
6240H 6860 Product Line Overview 6860 6870 6880 6800 Product Line Overview 6800HP 6810P 6850P
Moving Coil Product Line Overview 6350 6450 6650 6900 6400 Mirror Coatings & Specifications Servo Drivers Galvo Selection Guide 
Cambridge Contacts Request Information Driving Directions Worldwide Distributors